Vehicle Service Equipment  614-861-2390

7 steps for improving vehicle lifting safety for large vehicle/equipment maintenance shops

The challenges facing fleet operators of all types are significant and continue to grow.

Commercial vehicle fleets across North America – ranging from transit agencies, public works departments, municipal governments, school districts, the U.S. military and large corporations – are increasingly utilizing higher capacity vehicles that often run hotter. What’s more, these vehicles require specific maintenance procedures that must be performed on an established timetable. Thus, fleet downtime is the enemy and having the correct lifts is essential.

1. Certification

In today’s complex fleet maintenance facilities, managers should make sure that their lifts carry the coveted “Gold Label” from the Automotive Lift Institute (ALI). As the ALI website states: “There’s more riding on your vehicle lifts than cars and trucks… it’s crucial that they are chosen with care.” The ALI Lift Certification Program has made it easy for lift buyers to choose lifts that have been third-party tested and proven to meet the safety and performance requirements outlined in the safety standard ANSI/ALI ALCTV (current edition). Lift testing includes verification of the structural integrity and all of a particular lift model’s systems and components, proper function of its controls and load-holding devices, proper lowering speeds, and overload protection. For its part, CJM is proud to offer a high number of ALI certified heavy duty vehicle lifting products.

2. Lift Selection: Weight and Height Matters

Facility maintenance workers should know in advance the weight of the heaviest vehicle they intend to lift and make absolutely certain that the lift selected is certified to meet or exceed that capacity. In terms of height, always measure the height clearance of the facility – prior to selecting a lifting system – to ensure ample room to raise and walk around a vehicle for servicing. Further, note the height of the tallest vehicle you intend to lift and make certain there is sufficient room to raise the vehicle to a proper height that will permit a technician to work comfortably underneath the vehicle.

3. Vigilance During Set-Up

When ready to operate the lift, do a full sweep of the area. Check the perimeter of the lift to confirm that nothing is obstructing its path and there are no hazards. Then, lift the vehicle no more than 12″ off the ground, pause, and do another sweep of the area to further check that there are no impediments. Also, make sure that the vehicle being lifted is level.

4. Keep it Stable

Before you begin with mobile column lifts, always place them on a firm foundation and level ground. And when lifting outdoors, be aware of wind loads. Also, make certain that all personnel are clear of the vehicle and that the wheels on the vehicle being raised are properly engaged with the forks on the mobile column lifts. For in-ground lifts, operators should check that the contact points are properly positioned.

5. Technician Protection

At all times, lift vehicles to the proper height allowing technicians to move about and work comfortably underneath the vehicle. Always set the lift to its locks when working under a vehicle or other equipment.

6. Maintain a Strict Maintenance Schedule

Make certain that all lifts are subject to a regular program of scheduled maintenance – in accordance with the manufacturer’s recommended schedule – and receive annual lift inspection by a certified lift inspector.

7. Create a Culture of Safety

Beyond choosing the right lifting system, promoting a positive culture of safety at the shop is essential. Service bulletins, safety messages, and continuously updating technicians’ skills are vital to a smooth-running maintenance facility. It is also suggested to use accessories specifically designed to ensure fleet maintenance operator safety and proper ergonomics.

  • One example is a high-lift wheel dolly. It allows wheel removal and proper alignment of dual tire assemblies and brake drums to be completed efficiently and accurately, without back strain.
  • Make sure only authorized personnel operate the lifts

In conclusion- In the heavy duty vehicle lift business, safety should always be a top priority. With a well-planned safety-first approach, technicians can perform their duties efficiently and with confidence, thereby, contributing to a positive workplace atmosphere as well as greater longevity of the vehicles they service and the equipment they utilize.

Information provided by: Multiple sources

Related Projects

2018 International Auto Show Charity Gala is a Huge Success

2018 International Auto Show Charity Gala is a Huge Success This was featured in The Columbus Dispatch on 3/25/2018. We are absolutely thrilled for our …

Learn More

Popcorn and Air Compressors

Hi everyone. The other day I was making popcorn for my family. I do that every once in a while when we plan to watch …

Learn More
lincoln vehicle service improvements

10 Tips to Help Increase Vehicle Lifting Safety and Tech Safety in Your Shop

Every shop owner/manager is constantly trying to increase the productivity and efficiency of their shop, but it cannot come at the sacrifice of safety. The …

Learn More

Contact us

Join the 1000+ Active Customers Who Trust Anglin Equipment for Service & Repairs

Fill out the form below to talk to an Anglin Equipment product expert or give us a call at 614-861-2390 for emergency support.